USER MANUAL & MAINTENANCE

FEATURES

ADJUSTABLE TEMPERATURE LED*

1. Touch once to switch on the LED Lights if it is not already on.

2. Press and hold the sensor until the desired temperature is obtained.

DEMISTER

Touch the sensor with the stream icon (shown right) to switch on the demister.

For some models, the demister will automatically switch off after an hour.

*When the Demister touch sensor is LIT, the function is off.  When the Demister touch sensor is off, the feature is on

DIMMER

When the LED Lights are on, press and hold the dimmer sensor (shown right) until the desired brightness is obtained.

BLUETOOTH

1. With the Bluetooth settings open on your device, press the Bluetooth icon on your Remer Mirror and wait for the tone.

2. Once you hear the tone, you will see the Remer device pop up under Bluetooth settings, simply press to connect.

3. Once connected, you can choose your favourite song, podcast or audio book and enjoy. Remer Bluetooth will reach a range of approx. 10 metres in ideal conditions.

MIRAGE MAGNIFIER* with wireless charging stand.

• To turn the device on/off, tap the button under the face of the magnifier.

• To switch between colour change and dimming mode, quickly double tap the button.

• To change the colour temperature or change the brightness of the product, touch and hold the button to change the colour/dim.

• Place your Mirage magnifier on the left side of your Remer mirror**, where indicated on the product, ensuring a magnetic connection before releasing. To remove, gently tilt the bottom of the magnifier away from the mirror and lift.

• To charge the magnifier, place it on the docking station. The LED on the station will turn red for 10 seconds to confirm the charging connection. A solid red light indicates charging, while a flashing red light means the device needs to be repositioned.

For models with a single or no button, all features are controlled by the single switch and if the mirror is on, so are the features.

*Not standard on all products, please refer to model specifications for features on your mirror.

**The Mirage Magnifier is compatible with specific models and must be purchased together in a bundle. Refer to the model specs for compatibility details.

CLEANING AND MAINTENANCE TIPS

• Do not leave LED Mirror on for prolonged period

• Please clean mirror surface with a mixture of 10% methylated spirits and 90% water and use a soft micro-fibre cloth/chamois

• Dry off mirror edges

• Wipe off wall water spillages immediately

• To clean Frames, please use a soft microfibre cloth/chamois and warm water only DO NOT Use any abrasive, acidic or alkaline based solvents or cleaners. Avoid sharp objects and keep heat and hot objects away from all surfaces of any Remer products.

DO NOT Use any abrasive, acidic or alkaline based solvents or cleaners. Avoid sharp objects and keep heat and hot objects away from all surfaces of any Remer products.

DOWNLOAD

To access user guides, please click below: